Ceresit - malta pro montáž a opravy CX 20 Comfort

A material used for precise assembly of the element and filling the defect, characterized by a comfortable wear time.

Features

• for the reconstruction of a concrete element
• comfortable wear time (20 min)
• high strength after hardening
• for vertical and horizontal surfaces
• for filling defects in and cracks up to 50 mm
• bright color
• for indoor and outdoor use

Application

The mortar has a comfortable wear time (20 minutes), which makes it suitable for a wide range of users. Ceresit CX 20 Comfort is used for:

• mounting elements made of metal, plastic, etc., e.g. hook w, connector w, anchors, element in electrical installations (electrical boxes and boxes), hinge w, guiding or corner strips, element in installation (technological pipe transitions embedding the element in installation pipes and the handle w) on substrates such as concrete, walls (concrete blocks, cellular concrete, brick, etc.)
• filling defects and cracks with a size of 5 to 50 mm in plasters and walls (e.g. filling installation grooves), floors and all kinds of prefabricated elements, in ceiling and wall elements; larger cavities should be filled with CX 20 Comfort mixed with pure sand in a 1: 1 ratio
• reconstruction of damaged concrete elements, plaster in etc., e.g. wall corners, stair edges

The product is water and frost resistant, therefore it can be used indoors and outdoors, on vertical and horizontal surfaces. The product is also recommended for minor surface repairs, elements in concrete, plaster in.

Technical data

• base cement mixture with mineral fillers and modifiers
• bulk density about 1.41 kg / dm ³
• mixing ratio: 0.4 l of water per 2 kg; 1.0 l of water for 5 kg; 4.0 liters of water for 20 kg
• application temperature from +5 C to +25 C
• consumption time approx. 20 minutes
• compressive strength without addition of sand: after 6 h ≥ 15.0 MPa; after 24 h ≥ 17.0 MPa; after 28 days ≥ 33.0 MPa (according to PN-EN 12190: 2000)
• bending strength without addition of sand: after 6 h ≥ 2.5 MPa; after 24 h ≥ 3.5 MPa; after 28 days ≥ 4.2 MPa (according to PN-EN 1015-11: 2001)
• capillary absorption ≤ 0.5 MPa kg / m ² xh ^0.5 (according to PN-EN 13057: 2004)
• adhesion to concrete ≥ 1.5 MPa (according to PN-EN 1542: 2000)
• adhesion of steel covered with mortar to concrete at shear ≥ 45 MPa (according to PN-EN 15184: 2006)
• ion content in chloride ≤ 0.05% (according to PN-EN 1015-17: 2002 + A1: 2005)
• approximate consumption about 1.6 kg / dm ^{3 of the} filled volume