Bolix - leveling and mortar Bolix W
Bolix - leveling and mortar Bolix W

Bolix - leveling and mortar Bolix W

Average grade: 0 / 0 reviews
It is used for leveling and supplementing unevenness in mineral substrates before making thin-layer plasters, fixing thermal insulation boards in thermal insulation systems, laying ceramic and stone cladding and pouring self-leveling floor mortars / based on cement or anhydrite /. It is used outside and inside the building (including rooms exposed to temporary moisture), on non-deformable concrete, anhydrite substrates, on ceramic brick walls, sand-lime brick, cellular concrete as well as on cement and cement-lime plastering. BOLIX W mortar is also used for masonry from blocks and aerated concrete elements
Save amount -
zł35.67 zł35.67
Tax included

Najniższa cena z ostatnich 30 dni: zł35.67 brutto. (zł29.00)

On product inquiry
cennikowa cena jednostkowa netto
zł31.50
za opakowanie
cennikowa cena jednostkowa brutto
zł38.75
za opakowanie
promocyjna cena jednostkowa netto
zł29.00
za opakowanie
promocyjna cena jednostkowa brutto
zł35.67
za opakowanie
całkowita cena cennikowa netto
zł31.50
za 1 opakowanie
całkowita cena cennikowa brutto
zł38.75
za 1 opakowanie
całkowita cena cennikowa netto
zł29.00
za 1 opakowanie
całkowita cena cennikowa brutto
zł35.67
za 1 opakowanie

Products description

It is used to level and fill unevenness in mineral substrates before making thin-layer plaster, fastening thermal insulation boards in thermal insulation systems, laying ceramic and stone cladding and pouring self-leveling floor mortars (on a cement or anhydrite basis). It is used outside and inside the building (including also in rooms exposed to temporary moisture), on non-deformable concrete, anhydrite substrates, on ceramic brick walls, sand-lime brick, cellular concrete as well as on cement and cement-lime plaster coatings . BOLIX W mortar is also used for masonry with a block and a component of cellular concrete

Technical data

  • Mixing proportions: 2.75 3.25 l of water per 25 kg of mortar
  • Compressive strength (after 28 days):> 8 MPa
  • Flexural strength (after 28 days):> 3 MPa
  • The load caused by walking layers of thickness 15 mm: after 24 hours
  • Full load: after 14 days
  • Consistency: dry powder
  • Shelf life: under appropriate conditions, up to 12 months from the date of production
  • Moisture resistance: periodically resistant
  • Aging resistance: resistant
  • Oil and solvent resistance: not resistant
  • Acid and alkali resistance: not resistant
  • Temperature resistance: from -20 C to +50 C
  • all technical data are provided for a relative humidity of 60% and an air temperature of +20 C /
  • The average consumption of adhesive mortar for making the dressing layer on a properly prepared substrate is approx. 1.90 kg / m2 for every 1 mm of layer thickness. In order to determine the exact consumption of the product, it is recommended to carry out tests on a given surface.
  • composition: BOLIX W mortar is a dry mixture of hydraulic binders, polymer, base of fine-grained mineral fillers and modifying additives.

Specification

fire classification - reaction to fire
A1
application temperature range
5 - 25 °C
amount in box
25 kg
color
grey
thickness
5 - 15 mm
bulk density
1,7 kg/dm³
time consumption
45 min.
MPN
11426

Download

Bolix W - Karta techniczna

Download file

Bolix W - Certyfikat ITB

Download file

Reviews

0 / 5

0 clients reviews

16 other products in the same category:

Previous
Next