Qmar - silicone for mirrors

One-component, always flexible adhesive based on high-quality neutral silicone. Designed for gluing mirror mosaics (mirror-mirror connection) as well as for fixing decorative mirrors on various substrates: glaze, glass, plasters, concrete, metal, wooden or plastic frames. Neutral compared to the mirror layer protected according to the standard - does not cause discoloration.

properties

• after curing, the mass remains permanently elastic,
• resistant to weather conditions: water and changing temperatures,
• workability up to 5 minutes,
• binding speed approx. 2mm / 24h,
• application temperature - from + 50C to + 300C.

Substrate preparation and usage

Surfaces should be clean, dry and free from dust, dirt and grease. Concrete surfaces must be primed with acrylic primer. Before use, cut off the end of the tube and screw on the applicator (do not cut the end of the tube!). Squeeze the mass using a suitable gun. Apply in the form of r parallel bands spaced apart every 3-4 cm. Glue the mirror to the ground and leave it supported until the adhesive sets. When setting the adhesive, do not seal the rim of the mirror. The mirror support time and the amount of adhesive applied depend on the size and weight of the mirror.

attention

To avoid mistakes, check the suitability of the product for its intended use. Shelf life: 12 months.