Ceresit - CN 87 quick-setting floor compound
Ceresit - CN 87 quick-setting floor compound

Ceresit - CN 87 quick-setting floor compound

Average grade: 0 / 0 reviews
Ceresit CN 87 is used for constructing floor underlays: - associated with a cement base, 10 to 80 mm thick, - on a separating layer (e.g. foil, paper), 35 to 80 mm thick, - "floating" on a thermal insulation layer or acoustic, thickness from 45 to 80 m. For underfloor heating - the minimum thickness of 45 mm should be increased by the outer diameter of the heating pipes. The mortar mixed with water has a dense plastic consistency, allowing it to form slopes. Underlays and floors made of CN 87 (non-reinforced or reinforced) can be used indoors or outdoors. The screed of CN 87 mortar can be used as the final functional layer, it is also possible to lay ceramic tiles, parquet, make resin floors, or pour floors from Ceresit and Thomsit self-leveling or spreading mortars.
Save amount -
zł54.39 zł54.39
Tax included

Najniższa cena z ostatnich 30 dni: zł54.39 brutto. (zł44.22)

On product inquiry
cennikowa cena jednostkowa netto
zł49.30
za opakowanie
cennikowa cena jednostkowa brutto
zł60.64
za opakowanie
promocyjna cena jednostkowa netto
zł44.22
za opakowanie
promocyjna cena jednostkowa brutto
zł54.39
za opakowanie
całkowita cena cennikowa netto
zł49.30
za 1 opakowanie
całkowita cena cennikowa brutto
zł60.64
za 1 opakowanie
całkowita cena cennikowa netto
zł44.22
za 1 opakowanie
całkowita cena cennikowa brutto
zł54.39
za 1 opakowanie

Products description

Ceresit CN 87 is used for laying floor foundations:
- associated with a cement base, 10 to 80 mm thick,
- on a separating layer (e.g. foil, paper), thickness from 35 to 80 mm,
- "floating" on a layer of thermal or sound insulation, thickness from 45 to 80 m. For underfloor heating - the minimum thickness of 45 mm should be increased by the outer diameter of the conductor in heating.
The mortar mixed with water has a dense plastic consistency, allowing the formation of slopes. Primers and floors made of CN 87 (non-reinforced or reinforced) can be used inside or outside buildings. Screeds of mortar CN 87 can be used as the final wear layer, you can also lay ceramic tiles, parquet, make resin floors, or pour floors with Ceresit and Thomsit self-leveling or spreading mortars.

Technical data:
- base: ready-mixed dry mix based on hydraulic binders, modifier and mineral fillers
- bulk density: approx. 1.7 kg / dm3
- mixing ratio: 1.75 - 2.0 l water per 25 kg CN 87
- application temperature: from +5 C to +25 C
- consumption time: up to 40 min.
- pedestrian traffic: after 3 hours
- compressive strength (according to PN-EN 13813): C40
- bending strength (according to PN-EN 13813): F7
- shrinkage (according to PN-EN 13813): 0.80 mm / m
- Abrasion on the Bohme shield (according to PN-EN 13813): A9
- consistency (according to PN-EN 13813): 130
- reaction to fire (according to PN-EN 13813): A1 fl
- release of volatile substances: in accordance with PN-89 / Z-0421/02
- packaging: 25 kg
- quantity on the pallet: 42 pieces
- approximate consumption per m2:
CN 87 approx. 2.0 kg / m2 for every cm of thickness
contact layer approx. 0.25l CC 81 + 3.5 kg CN 87
- the product has the required documents for use.

Warning!
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.

Reviews

0 / 5

0 clients reviews

16 other products in the same category:

Previous
Next