Drizoro - Concreseal thin layer mortar - 1

Two-component mortar based on microcement and synthetic acrylic resin, especially recommended for creating a smooth finishing and decorative coating of low thickness or sharp. It is characterized by great abrasion resistance and resistance to weather conditions.

Features

• creates an uninterrupted smooth leveling film with no joints or seams on walls and floors
• good adhesion to many different substrates: concrete, mortar, ceramic tiles, etc.
• does not require priming
• very good resistance to abrasion and weather conditions
• suitable for use under water immersion
• very low water absorption: suitable for humid places such as kitchens or bathrooms
• easy and clean material for application
• allows diffusion and water vapor permeability

Application

• decorative finish smoothing and sealing mortar in exterior and interior applications
• smooth decorative finish of Maxseal or Maxseal Flex waterproofing coatings in swimming pools, ponds, artificial lakes, etc.

Technical data

• external appearance and color of component A - white, milky liquid
• external appearance and color of component B gray or white powder
• specific gravity of component A (liquid) at 20 ° C and 50% relative humidity 1.00 0.10 g / cm ³
• specific gravity of component B (powder) at 20 ° C and 0.90 0.10 g / cm ^{3 relative humidity}
• weight ratio of the component in A: B in the mix: 9:20
• minimum application temperature of substrate and surroundings> 5 ° C
• Shelf life of the A + B mix at 20 C and 50% relative humidity approx. 20–30 min
• time interval between the application of successive layers at a temperature of 20 C and a relative humidity of 50%> 30 min
• setting time at 20 ° C and 50% relative humidity 3–4 h
• maturing time before putting into service for pedestrian traffic at 20 ° C and 50% relative humidity 24 hours
• compressive strength after 28 days> 45 MPa (according to EN 12190)
• adhesion to concrete after 28 days> 1.5 MPa (according to EN 1542)
• layer thickness 0.20-0.25 mm
• consumption per one layer / total 0.20–0.25 / 0.4–0.5 kg / m ²
• package 29 kg