Qmar - nízkotlaká hadicová pěna

The foam is intended for assembly and sealing for specialized assembly groups.

Application

• especially recommended for all types of windows and doors
• thermal insulation of water, sewage and central heating networks
• bonding and insulating wall panels, corrugated sheets, roofing boards, etc.
• soundproofing and sealing of partition walls and car cabins
• joining prefabricated element in wooden frame construction
• thermal insulation roof in and flat roof in
• filling gaps in thermal insulation when insulating buildings

properties

• the foam has extremely good adhesion to smooth and porous surfaces occurring when installing doors and windows: PVC, masonry, concrete, brick, wood, metal and other
• low-pressure formula eliminates frame warping and ensures full gap filling
• has excellent thermal insulation and soundproofing parameters
• cures under the influence of moisture contained in the atmospheric air
• resistant to mold and mildew

Method of use

• Thoroughly clean and degrease the working substrate.
• Before use, make sure the can is positive (optimum +20 C).
• Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
• Screw the applicator to the can, the working position for assembly is the can position "to the top".
• Apply foam from below to the gap.
• Fill the joints up to 50% deep, but not more than 5 cm per one layer, wider than 5 cm should be filled in layers,
• Moisten each layer after application with water, e.g. with a sprayer.
• Excess foam after curing should be removed mechanically (e.g. with a knife).
• After full hardening, the foam should be protected against UV rays using plaster, paints, for example.