Bolix - lepidlo na polystyrénové desky Bolix UZB

Name: Bolix - lepidlo na polystyrénové desky Bolix UZB
Brand: Bolix
Price: 90.39 PLN
Availability: InStock

Average grade: 0 / 0 reviews

It is used for gluing foamed polystyrene boards to typical mineral substrates and making a reinforced layer on foamed polystyrene with a suitable fiberglass mesh. The product properties allow application in reduced ambient temperature ranges, i.e. from + 3 ° C, and after 8 hours. possible decreases to -5 ° C since application. I show high adhesion and elasticity to the substrate and thanks to the use of microfibers it is resistant to scratches and cracks. It is used to insulate the outer walls of buildings in the technology of a seamless thermal insulation system and to repair and renovate the outer walls of buildings insulated according to the "light wet" method. It is also used for leveling / unevenness up to 5 mm / and smoothing mineral substrates before applying paint and thin-layer plasters.

Save amount -

90,39 zł 90,39 zł

S DPH

Najniższa cena z ostatnich 30 dni: 90,39 zł brutto. (73,49 zł)

On product inquiry

cennikowa cena jednostkowa netto

78,60 zł

za opakowanie

cennikowa cena jednostkowa brutto

96,68 zł

za opakowanie

promocyjna cena jednostkowa netto

za opakowanie

promocyjna cena jednostkowa brutto

za opakowanie

całkowita cena cennikowa netto

78,60 zł

za 1 opakowanie

całkowita cena cennikowa brutto

96,68 zł

za 1 opakowanie

całkowita cena cennikowa netto

za 1 opakowanie

całkowita cena cennikowa brutto

za 1 opakowanie

Products description

It is used for gluing foamed polystyrene boards to typical mineral substrates and making a layer reinforced with foam with a suitable fiberglass mesh. The product properties allow application in lower ambient temperature ranges, i.e. from +3 C, and after 8 hours. since application, possible temperature drops to -5 C. I show high adhesion and elasticity to the substrate and thanks to the use of microfibers it is resistant to scratches and cracks. It is used when insulating the outer walls of buildings in the technology of a seamless thermal insulation system and when repairing and renovating the outer walls of buildings insulated according to the "light wet" method. It is also used for leveling / unevenness up to 5 mm / and smoothing mineral substrates before applying paint and thin-layer plaster.

Technical data

Mixing proportions: 5.25-5.75 l water per 25 kg of glue
Open work time: approx. 1.5 hours
Flow: <0.12 mm
Adhesion:
- adhesion to concrete:> 0.6 MPa
- for foamed polystyrene:> 0.1 MPa (tear in the foamed polystyrene layer)
Consistency: dry powder
Shelf life: under appropriate conditions, up to 12 months from the date of production
all technical specifications are given for a relative humidity of 60% and an air temperature of +20 ° C
Consumption of adhesive mortar when insulating the building:
when bonding foamed polystyrene boards on a properly prepared base, it is approx. 4.0 kg / m2 when making the reinforced layer is approx. 4.0 kg / m2
When filling the substrate with BOLIX UZB adhesive mortar, its consumption depends on the thickness of the layer produced and is on average 1.3 kg / m2 (dry adhesive) for every 1 mm of layer thickness. In order to accurately determine the product consumption on a given substrate, it is recommended to carry out appropriate tests.
BOLIX UZB glue is a dry mix of hydraulic binders, polymer, base of fine-grained mineral fillers and modifying additives.