Index: 15532-9664

Qmar - sanitární silikon

Average grade: 0 / 0 reviews
A special silicone sealant is intended for grouting ceramic cladding, especially in the corners of the walls, in the joints of the walls with the floor and in places of expansion joints. It is also used to fill gaps in sanitary facilities, e.g. around bathtubs, shower trays, washbasins, as well as kitchen furniture, air ducts and sanitary and heating installation pipes. Due to the components contained in the composition that prevent the mold from covering the hardened joint, the sealant is used especially in sanitary rooms, e.g. bathrooms, shower cabins, toilets, kitchens, laundries and other rooms with increased humidity. It has very good adhesion to commonly used non-absorbent materials in construction, such as ceramic tiles (glaze, terracotta, stoneware, clinker), glass and porcelain, faience and enamelled elements. The product can also be used on surfaces covered with a strongly adhering paint coating and on metal surfaces protected against corrosion, but this type of application (as well as on other unusual surfaces) should be preceded by an adhesion test. Sanitary silicone should not be used to glue aquariums, mirrors and on surfaces where the silicone could come in direct contact with food or drinking water. Permanently high flexibility as well as resistance to weather conditions and UV radiation allow the product to be used both inside and outside the building.

opakowanie

kolor

Save amount -
16,04 zł 16,04 zł
S DPH

Najniższa cena z ostatnich 30 dni: 16,04 zł brutto. (13,04 zł)

Minimální množství pro objednání tohoto produktu je 12.
On product inquiry
cennikowa cena jednostkowa netto
14,86 zł
za szt
cennikowa cena jednostkowa brutto
18,28 zł
za szt
promocyjna cena jednostkowa netto
13,04 zł
za szt
promocyjna cena jednostkowa brutto
16,04 zł
za szt
całkowita cena cennikowa netto
14,86 zł
za 1 szt
całkowita cena cennikowa brutto
18,28 zł
za 1 szt
całkowita cena cennikowa netto
13,04 zł
za 1 szt
całkowita cena cennikowa brutto
16,04 zł
za 1 szt

Products description

A special silicone sealant is intended for grouting ceramic cladding, especially in the corners of the walls, in the joints of the walls with the floor and in places of expansion joints. It is also used to fill gaps in sanitary facilities, e.g. around baths, shower tray, washbasins, as well as kitchen furniture, air duct and duct in sanitary and heating installations. Due to the components contained in the composition that prevent the mold from covering the hardened joint, the sealant is used especially in sanitary rooms, e.g. bathrooms, shower cabins, toilets, kitchens, laundries and other rooms with increased humidity. It has very good adhesion to commonly used non-absorbent materials in construction, such as ceramic tiles (tiles, terracotta, stoneware, clinker), glass and porcelain, faience and enamel elements. The product can also be used on surfaces covered with strongly adhering paint and on corrosion-protected metal surfaces, but this type of application (as well as on other unusual surfaces) should be preceded by making adhesion tests. Sanitary silicone should not be used to glue aquariums, mirrors and surfaces where the silicone should have direct contact with food or drinking water. Permanently high flexibility as well as resistance to weather conditions and UV radiation allow the product to be used both inside and outside the building.

properties

  • resistant to mold and fungi,
  • permanently elastic
  • workability up to 5 minutes,
  • temperature resistance from -40 C to +180 C.

Substrate preparation and usage

Surfaces should be clean, dry and free from dust, dirt and grease. Before use, cut the end of the tube and screw the applicator on, cutting it to the proper thickness of the weld. Squeeze the mass using a suitable gun. The applied sealant can be smoothed with a spatula or other tool wetted with a soap solution or other similar agent.

attention

To avoid mistakes, check the suitability of the product for its intended use. Uncured product may be irritating to respiratory system and skin. KEEP AWAY FROM CHILDREN. shelf life: 18 months.

Specification

konzistence
pasta
skladovací teplota
od +10 do +25 °C
tepelná odolnost po vytvrzení
od -40 do +180 ºC
vytvrzovací systém
acetatowy
specifická gravitace
0,98 g/cm³
Doba zpracování
5 min.
rychlost vytvrzování
ok. 2mm / 24h
MPN
15532

Ke stažení

Qmar silikon sanitarny - Karta techniczna

Download file

Qmar silikon sanitarny - Karta Charakterystyki

Download file

Reviews

0 / 5

0 clients reviews

Loading...