Drizoro - Maxepox Opravná epoxidová malta

Solvent-free, three-component epoxy mortar, recommended especially for leveling, securing and repairing concrete on horizontal surfaces, which can be applied in a layer up to 50 mm thick. The repaired place shows excellent mechanical properties, good chemical resistance and resistance to impact and abrasion.

Features

• possibility of application in a layer with a thickness of 5 mm to 50 mm
• great adhesion to concrete and reinforcing steel
• does not require special material in the undercoat
• great impact resistance and mechanical strength
• durability of the repaired element w
• application in successive layers without sagging
• no shuttering needed
• good chemical resistance to oils, fats, fuels, dilute acid and alkaline solutions
• waterproof product
• good thixotropy
• non-toxic, solvent-free, non-flammable product
• suitable for use in places with poor ventilation

Application

• repair and finishing of ramps with non-slip material with high resistance to wear caused by wheeled traffic
• reconstruction of concrete stairs and steps, fastening of heavy machinery, etc.
• repairing and patching cracks and other damage on floors, shaping concave corner in etc.
• reconstruction of concrete floors and floors, roads, loading and unloading stations, places subject to intensive use in warehouses, garages, parking lots, hangars, industrial equipment, etc.

Technical data

• external appearance and color of component A clear, clear liquid
• external appearance and color of component B yellow, clear liquid
• external appearance and color of component C silicate aggregate
• weight ratio of A: B: C mix 3.4: 1.6: 30
• element content in solids in the mixture A + B + C 100%
• specific gravity of the mixture A + B + C 2.05 0.1 g / cm ³
• flash point - non-flammable product
• application temperature 8-30 C; relative humidity <85%
• working life of a 10 kg kit at a temperature of 10 C - 35 min; at a temperature of 20 C - 20 min; 30 C - 10 min
• touch-drying time at a temperature of 20 C 8 h (depending on the thickness of the layer)
• complete maturation time at 20 ° C before putting into service: 1 day for pedestrian traffic; for vehicle traffic 3 days
• compressive strength after 28 days at 20 C> 80 MPa bending strength after 28 days at 20 C> 28 MPa
• modulus of elasticity> 15,000 MPa
• coefficient of linear expansion 3.5 10-6 cm / C
• adhesion to concrete after 28 days at a temperature of 20 C> 3 MPa
• excellent resistance to water, sewage and sea water
• excellent resistance to fats, salts, diluted acids and bases
• application thickness 5 - 50 mm
• consumption * 2.0-2.1 kg / m per 1 mm thick layer
• packaging set (A + B + C) 35 kg

* the given values are indicative and depend on the porosity, texture and condition of the substrate and the application method used